|
Featured Tools
- Switch Port Mapper
 - Tool to check and display the devices connected
to the ports of a Switch.
- IP Address Manager - Tool to scan the subnets and identify the used and available IP Addresses.
- Rogue Detection - Tool to detect the unauthorized network access.
- Bandwidth Monitor - Tool to monitor the average BPS and percentage
utilization of all the Interfaces in the specified device.
- Network Monitor - Tool to monitor the availability and response times of critical network devices.
- Config File Manager - Config File Manager downloads/uploads the
StartUp and/or the Running config files from the given CISCO device
and displays them. It also shows the colored difference between
the two files.
- DHCP Scope Monitor - Tool to find the used and available IP addresses
in the scopes of the DHCP Server.
- Trap Receiver - Tool to view the SNMP Traps sent from the network devices.
- MAC
IP List - To get the list of MAC and IP Addresses in the
network.
|
- Ping
Tool - Tool to ping a node to check its connectivity status
in the network.
- Ping
Scan - Tool to scan a range of IP addresses to check if
they are alive and reachable in the network.
- SNMP
Ping - Tool to ping a node, for checking if the node is
SNMP enabled.
- SNMP
Scan - Tool to scan a range of SNMP-enabled IP addresses
to check if they are alive and reachable.
- Proxy
Ping - Tool to do a ping test from a remote router to another
remote device.
- Trace
Route - Tool to record the route (the specific gateway computers
at each hop) through the network from Host to the target Destination.
- MAC
Address Resolver - Tool to resolve IP Address or Host Name
to MAC Address and vice versa.
- MAC
Address Scan - Tool to discover the physical address of
a given range of devices and map them with the corresponding IP
addresses.
- DNS
Resolver - A data query tool to translate host name into
IP Address and vice versa.
- DNS
Scan - Tool to audit the given range of IPs for Reverse
Lookup.
- Wake-On-LAN
- Tool to remotely power on a PC.
- Port
Scanner - Tool to scan the ports of a system.
- System
Details Update - Tool to view and update the details, such
as Name, Location, and Contact details.
- System Explorer - Tool to view the complete details of a device like, disk space, cpu usage, processes, installed software, etc.
- TCP
Reset - Tool to find and reset the list of TCP connections
established with the switches, routers, etc., in the network.
- Device Scan
- Utility to scan a subnet or a range of IP Addresses to collect
the details of the Cisco Devices in the scanned range.
- TFTP Server
- Tool to view the Config Files available in the TFTP Root.
It also enables changing the TFTP Root directory and edit/upload
config files from here.
- Device Explorer - Tool to view the complete details of a cisco device like Device Snapshot, Chassis, Flash, IOS, IP Routes, Device Monitor, Interfaces, and Access Lists.
- SNMP
Walker - Tool to retrieve information for a set of OIDs
in a MIB.
- SNMP
Table - Tool to retrieve the data for the specified Table
OID from the device.
- SNMP
Graph - Tool to gather data in real time and to draw graph
for any SNMP device using the available data.
- MIB
Browser - Tool to load, browse, search, and walk through
SNMP MIBs, and perform certain basic SNMP functions.
- MIB
Viewer - Tool to retrieve and analyze information about
a MIB or a specific MIB OID/node from a MIB file.
- Community
Checker - Tool to detect the read and write community strings
of the devices in the network.
| Professional Edition |
Standard Edition |
Free Edition |
The Professional edition of OpUtils includes all the 34 tools mentioned
in the tools matrix.
|
The Standard edition of the OpUtils product includes the 27 tools mentioned in the tools matrix.
At any point of time users can upgrade to the Professional edition
of the product.
|
The free edition of the OpUtils product includes the 16 tools mentioned
in the tools matrix.
At any point of time users can upgrade to the Standard or the Professional
edition of the product.
|
|
|
